Ellebogen 200

$106.65 + VAT

The Ellebogen 200 marine engine mount, reference 129470-08350, is used as front and rear port mount on the 4JH-E, 4JH-TE, 4JH-HTE, 4JH-DTE, 4JH2, 4JH2E, 4JH2TE, 4JH2BE, 4JH2TBE, 4JH2HTE, 4JH2DTE, 4JH2UTBE, 4JH2UTE, 4JH3E, 4JH4, 4JH4-E, 4JH4-AE, 4JH5E, 4JH45, 4JH57 engines. They are also used as front and rear mounts on the 4JH3-TE, 4JH3-HTE, 4JH3-DTE, 4JH4-TE, 4JH4-HTE, 4JH80*, 4JH110* engines.

  • Indication on rubber: 200
  • Maximum static load: 150 kg

➜ Data Sheet
➜ See the mount position on the engine

Mount position on the engine / 129470-08350
Ellebogen 200 marine engine mounts
Engine/ Reference D/Back Port C/Back Starboard B/Front Port A/Front Starboard
4JH-E / 129470-08350
4JH-TE / 129470-08350
4JH-HTE / 129470-08350
4JH-DTE / 129470-08350
4JH2 / 129470-08350
4JH2E / 129470-08350
4JH2TE / 129470-08350
4JH2BE / 129470-08350
4JH2TBE / 129470-08350
4JH2HTE / 129470-08350
4JH2DTE / 129470-08350
4JH2UTBE / 129470-08350
4JH2UTE / 129470-08350
4JH3E / 129470-08350
4JH4 / 129470-08350
4JH4-E / 129470-08350
4JH4-AE / 129470-08350
4JH5E / 129470-08350
4JH45 / 129470-08350
4JH57 / 129470-08350
4JH3-TE / 129470-08350
4JH3-HTE / 129470-08350
4JH3-DTE / 129470-08350
4JH4-TE / 129470-08350
4JH4-HTE / 129470-08350
4JH80* / 129470-08350
4JH110* / 129470-08350
Wedge locking of the fixation
Nord Lock®

Nord-Lock® has created an innovative wedge locking technology that ensures bolted joints, even when they are exposed to high vibrations and dynamic loads. That’s why it’s impossible for our brackets to accidentally loosen up due to the wedge created under the screw head and nut.

Like a sack mouth knot, this system uses tension instead of friction to ensure anchors with high vibrations and dynamic loads.

Rubber compound with high hysteresis
The highest performance on the market

Manufactured by injection: This improves by 97% the homogeneity of the internal composition of the elastomer.

Top quality screws: Coated with Zinc Nickel Anticorrosive Treatment according to DIN 50962-Fe//Zn- Ni(12)//A which ensures a performance of more than 800h Salt mist.

Anti-corrosive treatment equivalent to a stainless steel: The metal parts are also treated with Zinc Nickel Anticorrosive treatment according to DIN 50962-Fe//Zn- Ni(12)//A (800h Salina Fog Chamber). On which 2 layers of PU (Polyurethane) paint are added to ensure protection equivalent to an Aisi 304 stainless.

Adhesion surface of 90: To optimize adhesion between rubber and metal, we increase the adhesion area reaching 90% of the metal surface. Additionally, we round the molding radiens to reduce stress when the part is under load.

Feel the tranquility

Perfect fit for the best vibration absorption in your marine engine

Absorption of 80% vibrations at idling

Performing activities with the ship stopped, can become an abhorrent task. That’s why our supports guarantee the absorption of 80% of vibrations with the engine idling.

5-year warranty

All our parts use the highest quality components, so if you perform a good maintenance of your boat, we guarantee its perfect condition for 5 years.

Reduces vibrations by 95% while the boat is sailing

Sailing in a motor boat and doing so in total harmony with the sea is possible with our marine supports. They are able to absorb 95% of the vibrations produced by the engine.


The stand has a double PU layer bath, the screw is made of a zinc and nickel alloy. For 800-hour resistance in red corrosion tests in salt mist chamber.

Ellebogen 200
$106.65 + VAT